PS4 CERT
For Playstation4, controllers need to have a certification to be used for longer than 8 minutes.
Following steps are to update the certs in the steelbox.
1.
A. Connect the steelbox in to the PC.
B. While pressing 2 + 3 + 4 + 5, press UP button.
C. steelbox's oled shows [Web Config Mode]
2.
Open the web browser. (chrome compatible)
3.
In the browser, connect to 192.168.7.1,
then the set-up webpage shows up.
![](https://cdn.shopify.com/s/files/1/0623/4990/2000/files/unnamed_4_480x480.png?v=1700551961)
4.
Go to Configuration > Add-Ons Configuration
then scroll down until you see "PS4 Mode"
![](https://cdn.shopify.com/s/files/1/0623/4990/2000/files/unnamed_1_480x480.png?v=1700551985)
Enable the "PS4 Mode"
5.
Then it shows the section with the buttons to upload
the certificates on the steelbox.
![](https://cdn.shopify.com/s/files/1/0623/4990/2000/files/unnamed_2_480x480.png?v=1700552011)
Download This Certificate File.
The file has three files to upload.
- key.pem goes to the Private Key(PEM)
- serial.txt goes to Serial Number(16 Bytes in Hex Ascii)
- sig.bin goes to Signature(256 Bytes in Binary)
After uploading all three files, Click [Verify & Save]
6.
Reboot as Controller and it is done.
![](https://cdn.shopify.com/s/files/1/0623/4990/2000/files/unnamed_3_480x480.png?v=1700552035)